You just received your new Waydoo Evo and you need to charge your battery, and you just a few east steps away from getting on the water!
First place all items away in a cool dry place away from any flammable Items. Check to see if the battery and charger terminals are free from rust or dirt.
- Connects the Chargers DC Port to the Battery and press firmly for a secure connections and then lay the battery down face up on the ground Horizontaly
- Connect the AC input cord into the charger and then plug it into the wall outlet
- The charger will be in standby mode indicated by the blinking blue light
- The charger will be in standby mode with the light indicator with a solid blue light.
- Press the start/stop button on the chargers DC cord once to start charging, the battery screen will light up and the charger start/stop button will turn to solid blue, and the charger indicator shows a flashing green light.
- When the battery is fully charged the battery screen shows 100% power level
- If you need to stop charging press the charging start/stop button once then unplug the AC input cord from the wall outlet
- Use the magnet on the bottom of the controller to long tap on the power button for 3 seconds and the battery will turn off