How to Pair Your Waydoo Evo Board and Remote

 

Ensuring your Waydoo Evo board and remote are correctly paired is crucial for a smooth ride on the water. Here is a step-by-step guide to help you through the process.

How do I pair my Waydoo Evo Remote? 

Step 1: Turn on Your Waydoo Evo Remote

Start by powering on your remote. To do this, press and hold the power button until the remote turns on. It's important to ensure that the remote is fully charged before heading out on the water to avoid any interruptions during your ride.

  • Press and hold the power button until the remote turns on.

Step 2: Prepare Your Waydoo Evo Board

Now, let's move to your board. You'll need to use the magnet for this step. Make sure to pull the magnet far enough away so that the board stops reading it. Then, press the power button on your board, move the magnet away, and hold the power button down. Watch for the lights to flash and listen for a beep followed by a jingle that indicates your board is ready to pair.

  • Use the magnet and pull it far enough away so the board stops reading it.
  • Press the power button on your board, move the magnet away, and then hold the power button down.
  • Watch for the lights to flash and listen for a beep followed by a happy jingle that indicates your board is ready to pair.

Step 3: Pairing the Waydoo Evo with Bluetooth

Immediately proceed to pair with Bluetooth. Follow the same steps: move the magnet away and hold it down. This synchronization ensures that your board and remote are communicating effectively. It's crucial to complete this step promptly after the previous one to maintain the connection process.

  • Follow the same steps: move the magnet away and hold it down.

Step 4: Finalize the Pairing on Your Remote

Go back to your remote to complete the pairing. Press the power button and the negative button simultaneously. Check the battery bar on the remote; a full battery bar means the remote is successfully paired with your board. This visual confirmation ensures everything is set up correctly and you're ready to ride without connectivity issues.

  • Press the power button and the negative button simultaneously.
  • Check the battery bar on the remote; a full battery bar means the remote is successfully paired with your board.

Ready to Ride

Once everything is paired, you're ready to hit the water and have some fun!

 

Quick Guide: to Pairing the Waydoo Remote

Start by powering on your remote:

  • Press and hold the power button until the remote turns on.

Next, move to your board:

  • Use the magnet and pull it far enough away so the board stops reading it.
  • Press the power button on your board, move the magnet away, and then hold the power button down.
  • Watch for the lights to flash and listen for a beep followed by a happy jingle that indicates your board is ready to pair.

Immediately proceed to pair with Bluetooth:

  • Follow the same steps: move the magnet away and hold it down.

Go back to your remote to complete the pairing:

  • Press the power button and the negative button simultaneously.
  • Check the battery bar on the remote; a full battery bar means the remote is successfully paired with your board.

Once everything is paired, you're ready to hit the water and have some fun!

How do I pair the Waydo Flyer Remote?

Check out this video of Chris breaking down the Steps. 

Wrap-Up

Thanks for checking out this tutorial! Please like, share, and subscribe. If you have any questions, feel free to post them in the comments below.

When you're out on the water, ensuring your board and remote are correctly paired is crucial for a smooth ride. Here's a step-by-step guide to help you through the process.

Back to blog